ABB 3BSE038415R1 AO810V - Product Description, Product Parameters, and Product Specification


Product Description:


The ABB 3BSE038415R1 AO810V is a motor protection relay with an analog output signal. This relay belongs to the ABB's motor protection relay family, which offers a comprehensive range of features for monitoring and protecting electrical motors.


The 3BSE038415R1 AO810V relay is designed to detect and protect against overloads, phase failures, and other fault conditions in motors. It continuously monitors the motor's current and trips the circuit breaker or contactor when a fault is detected, thus preventing damage to the motor. Additionally, the relay provides an analog output signal that can be used for remote monitoring or control of the motor's condition.


The analog output signal from the relay can be configured to provide a voltage or current output, depending on the specific requirements of the application. This output signal can be used to indicate the motor's current status, such as its operating condition or fault status, to other devices or systems.


Product Parameters:


Rated Current: The maximum continuous current that the relay can monitor without tripping. This rating is typically based on the motor's rated current.

Protection Types: The relay provides overload protection, phase failure protection, and other fault detection capabilities to protect the motor from damage.

Analog Output Signal: The relay provides an analog output signal, which can be configured as a voltage or current output. This signal can be used for remote monitoring or control of the motor's condition.

Operating Voltage: The voltage required to power the relay's electronics.

Tripping Accuracy: The accuracy with which the relay trips the circuit based on the current measurement. This parameter indicates the reliability of the relay's tripping action.


Product Specification:


Compliance and Standards: The 3BSE038415R1 AO810V relay complies with various international and regional standards, such as IEC, to ensure its safety, reliability, and performance.

Operating Environment: The relay is designed to operate within a specified range of temperatures and humidity levels, ensuring stable performance under various conditions.

Dimensions and Mounting: The relay has standard dimensions and mounting options, facilitating easy installation and integration into existing electrical systems.

Communication and Interfacing: The relay may offer communication interfaces and protocols to allow integration with other devices and systems. However, since the AO810V model has an analog output, it does not provide digital communication capabilities.

Warranty and Support: ABB offers a warranty on the 3BSE038415R1 AO810V relay and provides customer support, technical assistance, and replacement parts as needed.


For detailed information about the ABB 3BSE038415R1 AO810V motor protection relay with analog output, it is recommended to refer to the official ABB product documentation, datasheets, or contact the company's technical support team.